900 MHz testing - DTX CableAnalyzer | Fluke Networks

База знаний

Домашняя страница базы знаний   >  Тестирование медных линий   >  Кабельный анализатор DTX CableAnalyzer™

Тестирование 900 МГц - DTX CableAnalyzer

If you have a need to test to 1 GHz (1 000 MHz), please look to the DSX-5000 CableAnalyzer.

For owners of the DTX-1800 who wish to carry out 900 MHz testing, you will need to set the CableAnalyzer up accordingly.
 
You will need DTX Version 2,74 or later for your DTX CableAnalyzer.
 
Enabling this option will extend the frequency of the test selected. It does not change the limit line of the selected standard.
 

Selected Standard

Store Plot Data

Нет

Да

Extended

TIA Cat 5e Пост. соединение

No Plot Data

100 МГц

350 МГц

TIA Cat 6 Пост. соединение

No Plot Data

250 МГц

350 МГц

TIA Cat 6e Пост. соединение

No Plot Data

500 МГц

900 МГц

ISO11801 PL max Class D

No Plot Data

100 МГц

350 МГц

ISO11801 PL max Class E

No Plot Data

250 МГц

350 МГц

ISO11801 PL max Class EA

No Plot Data

500 МГц

900 МГц

ISO11801 PL max Class F*

No Plot Data

600 МГц

900 МГц

ISO11801 PL max Class FA*

No Plot Data

600 МГц

900 МГц

10GBASE-T*

No Plot Data

500 МГц

900 МГц

CATV*

No Plot Data

900 МГц

900 МГц

 

 
*DTX-1800 only. Class FA  field testing is to 600 MHz only per EC 61935-1
 
This is also true for Channel measurements.
 
The feature is found by rotating the dial on the DTX CableAnalyzer to SETUP and selecting Instrument Settings.
 
Why doesnt Category 6 / Class E run to 900 MHz on Extended?
These standards are available in the DTX-1200, a 350 MHz tester. The concept behind Extended is to run the maximum frequency whilst keeping it simple. Extended on the DTX-1200 and DTX-1800 is the same for the sake of simplicity. Have an opinion? Please use the feedback link below and tell us what you are being asked to do.

 

Автор: А. Янг (A.Young)

Дата создания: 2014-2-19

Последнее изменение: 2014-2-19

 
 
 
 
Powered By OneLink