TS® 19 Test Sets

Product Highlights

TS19 telephone test equipment features DataSafe™, Tone or Pulse operation, Talk/Monitor capabilities and last number redial.

High impedance DataSafe^TM operation in monitor mode.
Tone (DTMF) and pulse operation
Last number redial
Polarity indication in talk mode

PRODUCT NAVIGATION

Overview

The Fluke Networks TS19 Test Set combines all the essential test set features at an affordable price. This test set was specifically designed for in-house telecom technicians. Its high impedance monitor prevents accidental disruption of service from clipping onto a data line while in monitor mode, thus ensuring the integrity of critical data lines. Features such as tone (DTMF) or pulse operation, talk/monitor capabilities, polarity test button and last number redial make this test set the perfect combination of features and price.

TS® Professional Series – Products Comparison

Features

Models & Accessories

Models

19800003

TS19 test set with banana jacks to alligator clips

19800009

TS19 test set with ABN

Specifications

Electrical

Loop Limit

2.4 kΩmaximum at 48 VDC (nominal 15 mA minimum loopcurrent)

DC Resistance (Talk Mode)

150 Ωtypical at 80 mA current

AC Impedance (Monitor Mode)

Low impedance (Ring position) 600 Ωat 1 KHz typical
High impedance (HI Z position) 100 kΩminimum at 1 KHz

Rotary Dial Output

10 pps .5 pps

Pulsing Rate

60 % ± 2 %

Percent Break

800 ms typical

Interdigit Interval Leakage During Break

> 50 kΩ

DTMF Output

±1 % maximum

Tone Frequency Error Level per Tone Pair

dBm maximum, - dBm minimum

High versus Low Tone Difference

4 dB maximum

Physical

Length

8.75 in (22.2 cm)

Width

2.375 in (6.03 cm)

Height

3.375 in (8.57 cm)

Weight

10.8 oz (.307 kg) maximum

Environmental

Temperature

Operating: -5 °C to °C
Storage: -40 °C to °C

Drop

1 meter, 4 times

Altitude

To 3,000 meters (10,000 feet) maximum

Relative Humidity

10 %to 80 % (non-condensing)

Regulatory Standards Used

47 CFR Part 15, Subpart B
ICES-003 Issue 3
AS/NZS 3548
EMC Directive 89/336/EEC, EN 55022:98, EN 61326:97, A1:98 Annex C, EN 61000-4-2, EN 61000-4-3
LV Directive 73/23/EEC, EN 610010.1 (1993)

Certifications and Compliance

CAN/CSA-C22.2 No. 60950-1-03
CAN/CSA-C22.2 No. 1010.1-92 CSA-C22.2 No. 1010.1B-97, UL/ANSI 3111-1